DE
ENThe Tracker, for leaner logistics
Locates containers and equipment outdoors via GNSS and inside halls via a Wi-Fi scan. With motion detection and geofences, positioning turns into complete container management.
- at one transmission per day
- > 5 years
- Industrial enclosure
- IP69k
- Positioning indoors and out
- GNSS + Wi-Fi
What the Tracker is for
Roll-off & skip containers
Location, idle times and turnover of every mobile container at a glance.
Equipment & logistics
Temperature and, optionally, humidity for sensitive goods.
Halls & depots
The Wi-Fi scan locates even where GPS cannot reach.
Knows where the container is – and reports when it arrives
You set up zones for your depot, your customers and recycling centres in the platform. When a container enters or leaves a zone there is a notification – idle times and turnarounds are recorded automatically.
What the Tracker can do
Geoposition
GNSS with GPS and Galileo outdoors, a Wi-Fi SSID scan in halls, plus mobile-network positioning.
Motion detection
Acceleration and tilt sensor: transmits more often when moving, sparingly at rest.
Connectivity
LTE-M and NB-IoT with Europe-wide coverage.
Temperature
Ambient temperature with every position, and optionally humidity too.
Configuration
Transmission intervals and tracking modes are freely selectable; three times a day by default.
Battery
Three replaceable AA lithium batteries, over 5 years at one transmission per day.
Mounting
IP69k industrial enclosure – screw, rivet or bond it.
Ready to go in minutes
Choose the mounting point
On the container, easy to reach for a battery change.
Fix it in place
Screw, rivet or bond it – the enclosure withstands dust, water and pressure washing.
Pair it in the app
Scan the tracker QR code, pick the container, assign it – done.
Pick the tracking mode
Set the transmission interval and create geofences for your locations in the platform.
Special requirements? Talk to us.
We develop our sensors ourselves – and adapt them to your use case where needed.